–
15
–
Adjusting and Leveling the Projector
Take note of the following when setting up the projector:
•
The projector table or stand should be level and sturdy.
•
Position the projector so that it is perpendicular to the screen.
•
Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.
•
Ensure the cables are in a safe location. You could trip over them.
1.
To raise the level of the projector, lift the projector
[A]
and press the height-
adjuster button
[B]
.
The height adjuster drops down
[C]
.
2.
To lower the level of the projector, press the height-adjuster button and
push down on the top of the projector.
3.
To adjust the angle of the picture, turn the tilt-adjuster
[D]
right or left
until the desired angle has been achieved.
