• For wall mounting installation, unscrew the spike from the luminaire. Mark and drill the hole for
the mounting bracket ensuring it does not infringe with electrical cables, water or gas pipes
• If installing outdoors, please ensure an RCD or RCBO is used
• The power source connections should be local and accessible via a suitable IP rated enclosure
• Connect the mains supply, Live (brown), Neutral (blue) and Earth (green/yellow)
• Switch on and check for correct operation
GENERAL
WARNING
The LED lamps fitted in this product are non-replaceable. The unit should be recycled in the correct
manner when it reaches the end of its life. Check local authorities for where facilities exist
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may
damage the product
Do not use any source of high pressure washers to maintain or clean this product
This product is not suitable for installation in or near a coastal or marine environment
This product is non-dimmable
This product must be disconnected from the circuit if subjected to any high voltage or insulation
resistance testing. Irreparable damage will occur if this instruction is not followed
80mm
60mm
230mm
160mm
Fig. 2
