Knightsbridge RCTRGB, Инструкция по установке и обслуживанию

Страница: 3 / 6

INSTALLATION & MAINTENANCE MANUAL
These instructions should be read carefully and retained after installation by the end user for future reference
and maintenance.
These instructions should be used to aid installation of the following product:
RCTRGB
SAFETY
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations
(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of
the circuit cable, fuse or circuit breaker
• Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
•
This product is for indoor use only
• This product is Class II double insulated
• This product is IP44 rated
INSTALLATION
•
Provide power to the required point of installation
• Using the mounting bracket as a template, mark the location for, and drill the fixing holes ensuring not
to infringe with any gas/water pipes or electrical cables
• Secure the mounting bracket to the surface using the screws provided
• Connect the luminaire to the mains supply ensuring the correct polarity is observed: L - Live (brown), N
- Neutral (blue) (see Fig. 1)
Fig. 1
• Secure the mains cable under the cable clamp and refit the terminal cover
• Carefully position the luminaire onto the mounting plate (see Fig. 2)
Fig. 2
•
Switch on and check for correct operation
Fig. 1
• Secure the mains cable under the cable clamp and refit the terminal cover
• Carefully position the luminaire onto the mounting plate (see Fig. 2)
INSTALLATION & MAINTENANCE MANUAL
These instructions should be read carefully and retained after installation by the end user for future reference
and maintenance.
These instructions should be used to aid installation of the following product:
RCTRGB
SAFETY
•
This product must be installed in accordance with the latest edition of the IEE Wiring Regulations
(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of
the circuit cable, fuse or circuit breaker
• Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
• This product is for indoor use only
• This product is Class II double insulated
• This product is IP44 rated
INSTALLATION
•
Provide power to the required point of installation
• Using the mounting bracket as a template, mark the location for, and drill the fixing holes ensuring not
to infringe with any gas/water pipes or electrical cables
•
Secure the mounting bracket to the surface using the screws provided
• Connect the luminaire to the mains supply ensuring the correct polarity is observed: L - Live (brown), N
- Neutral (blue) (see Fig. 1)
Fig. 1
•
Secure the mains cable under the cable clamp and refit the terminal cover
• Carefully position the luminaire onto the mounting plate (see Fig. 2)
Fig. 2
• Switch on and check for correct operation
Fig. 2
• Switch on and check for correct operation