3
• Ensure the LED Flex does not exceed the maximum wattage of the LEDFR1 controller
12V LED Flex – up to 72W
24V LED Flex – up to 144W
• Switch on power supply and check for correct operation
NOTE - LED driver voltage is dependent on the LED Flex requirement
REMOTE INTERFACE
REMOTE INTERFACE
1
On / Standby Mode
Turn on or standby mode. Unit will turn on and restore to
previous setting
2
Light Mode
Switch back to static light mode from dynamic mode
3 / 8 / 9
Dimmer
Switch to 100%, 50% or 25% dimmer mode
4 / 6
Dynamic Mode
8 dynamic modes
5 / 7
+ / - Speed
10 speed levels
10 / 11
+ / - Brightness
10 brightness levels
Supplied with
•
1 x control unit with connector, compatible with Knightsbridge LED Flex
•
1 x remote control
REMOTE INTERFACE
1
On / Standby Mode
Turn on or standby mode. Unit will turn on and restore to
previous setting
2
Light Mode
Switch back to static light mode from dynamic mode
3 / 8 / 9
Dimmer
Switch to 100%, 50% or 25% dimmer mode
4 / 6
Dynamic Mode
8 dynamic modes
5 / 7
+ / - Speed
10 speed levels
10 / 11
+ / - Brightness
10 brightness levels
Supplied with
•
1 x control unit with connector, compatible with Knightsbridge LED Flex
•
1 x remote control
