20mm to 60mm diameter
• Connect to the mains power supply via the pre-wired cable and plug
• To replace the lamp, open the cover and fit the lamp carefully between the 2 lampholders being careful not to
touch the lamp with you fingers as this affects the lamp longevity
• Refasten the cover
• Switch on and check for correct operation
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
WARNING
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage
the product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product may not be suitable for installation in or near a coastal or marine environment.
This product should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.
GENERAL
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance
with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch
code will invalidate the warranty. If this product should fail within its warranty period, it should be returned
to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for
any installation costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.
WARRANTY
Содержание HEOD1309 Series
Страница 1: ...INSTALLATION MAINTENANCE MANUAL HEOD1309xx...
