• For wall mounting, using the bracket as a template, mark the location for, and drill the fixing holes ensuring
not to infringe with any gas/water pipes or electrical cables (see Fig. 3). Fix the bracket to the surface using
suitable fixings (not included)
Fig. 3
• Connect the luminaire to the mains supply ensuring the correct polarity is observed: Live (brown), Earth
(green/yellow), Neutral (blue)
• Insert a suitable GU10 lamp (max. 35W)
• Switch on and check for correct operation
•
For wall mounting, using the bracket as a template, mark the location for, and drill the fixing holes
ensuring not to infringe with any gas / water pipes or electrical cables (see Fig. 3)
Fig. 3
•
Connect the luminaire to the mains supply ensuring that correct polarity is observed: Live (Brown),
Earth (Green/Yellow), Neutral (Blue)
•
Unscrew the bezel by turning anti-clockwise
•
Insert a suitable GU10 lamp (max 35W) into the lamp holder. Align the pins and turn 45° clockwise to
secure the lamp (a suction cup is provided to aid insertion / removal of the lamp where required)
•
Replace the bezel ensuring the gasket is not damaged, and is tightened to form a weatherproof seal
•
Switch on and check for correct operation
WARNING
This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product is not suitable for installation in or near a coastal or marine environment.
WARRANTY
This product has a warranty of 2 years
from the date of purchase. Failure to install this product in accordance
with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will
invalidate the warranty. If this product should fail within its warranty period it should be returned to the place of
purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve
the right to alter product specification without prior notice.
AVSEP19_V1
