• Using the suction cup provided, insert a GU10 lamp into the lamp holder. Align the pins and turn
45° clockwise to secure the lamp
• Replace the bezel on the fitting, insert the four screws and tighten ensuring the gasket is in place
and a tight seal is maintained
• Switch on power supply and check for correct operation
3
GENERAL
WARRANTY
This product should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may
damage the product.
This product is not suitable for installation in or near a coastal or marine environment
This product has a warranty of 1 year from date of purchase. Failure to install in accordance with
the current edition of the IEE Wiring Regulations, improper use, or removal of the batch codes will
invalidate the warranty. If this product should fail within its warranty period it should be returned
to the place of purchase for a replacement. ML Accessories does not accept responsibility for any
installation costs associated with the replacement product. Your statutory rights are not affected.
ML Accessories reserve the right to alter product specification without prior notice.
