Knightsbridge DC006, Инструкция по установке и обслуживанию

Страница: 3 / 7

Receiver
Remove the battery cover and insert 2 x AA 1.5V batteries (not included). Ensure battery polarity
matches the internal markings.
Mounting PIR sensor
• Mark the location of the fixing holes, and drill the holes ensuring not to infringe with any gas
/ water pipes or electrical cables
• Drill 2 holes on the wall at the required height and Insert wall plugs
•
Place the mounting bracket over the holes
• Insert the screws into the wall plugs (not included)
• Install the sensor