background image

Page 13

Assembly Instructions

knightgroup.co.nz

Agile Pro 

Electric 3 Column Double Sided Desk

Initial Setup Procedure & Manual Reset

NOTICE

Operating the desk system when it is not properly connected can damage the product.

• 

Ensure all Cables are properly connected

• 

Ensure that all required Actuators are ready to be operated

• 

Do not operate the Desk System until it is properly connected

• 

The Manual Reset Procedure is used to align the position of the Actuators within the desk system.    
You must perform a Manual Reset Procedure before using the whole system for the first time.

 

Risk of minor or moderate injury through crushing.

Anti-Collision system is inactive during start-up and reset processes. This may lead to minor or moderate
injury through crushing. Ensure that no persons or objects are in the desk’s range of motion.

rES

1.

Keep pressing DOWN key till the handset display shows “E-1” and “rES”
alternately and release the key.

60

2.

Keep pressing DOWN key, the desktop will move slowly down and return back
till the display shows “060”.

3.

Release the DOWN key.
> Now the electric height-adjustable desk can be used normally.

 

Содержание Agile Pro





















Отзывы: