Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Handset manual
Agile Move Desk
Display
screen
Memory
button
Up & down
button
OPERATION
• Display screen
- Shows current height of desk
• Up & down button
- Push button to adjust desk height until
you reach optimum height.
• Memory button
- After setting memory desk height will
auto adjust to the chosen setting.
• How to set memory key - Adjust desk to preferred height
using up & down button. Push a memory button (M1/M2/M3/M4)
for 5 seconds until you hear a beep to save setting.
ADDITIONAL SETTINGS
Press down M4 until you hear a second beep.
Use the up and down buttons to navigate menu then press
M4 button to make your selection.
A = Sensitivity of downwards anti collision
Up & down keys to navigate to selection
1 - High sensitivity
2 - Standard sensitivity
3 - Low sensitivity
4 - Off
Press M3 to make selection.
Press M3 again to save selection and return home screen.
B = CM or IN display
Up & down keys to navigate to selection
1 - CM
2 - IN
Press M3 to make selection.
Press M3 again to save selection and return home screen.
C = Basic height setting
Up & down keys to adjust height
Press M3 to make selection.
Press M3 again to save selection and return home screen.
D = Minimum height setting
Up & down keys to adjust height
Press M3 to make selection.
Press M3 again to save selection and return home screen.
E = Maximum height setting
Up & down keys to adjust height
Press M3 to make selection.
Press M3 again to save selection and return home screen.
F = Sensitivity of upwards anti collision
Up & down keys to navigate to selection
1 - High sensitivity
2 - Standard sensitivity
3 - Low sensitivity
4 - Off
Press M3 to make selection.
Press M3 again to save selection and return home screen.
ERROR CODES
ER1 = Motor stop
Power off and restart. If fault still exists there is a motor problem.
ER5 = Overload protection
There is too much weight on desk. Lighten load, power off and restart.
Hot = Overload power protection
Will auto recover after 5 min. If fault still exists power off and restart.
TIPS
• Locked handset
Handset locks automatically after 30 seconds of no use.
To unlock handset touch up or down key.
• To move the desk
Desk must be set on the lowest height to release castors for
moving the desk. Be sure to remove items that could be damaged
if they fall before moving the desk.
