28
Measuring
Once you have completed all preparations, you can start with
the actual measurement.
1) Connect the desired sensor to the meter. Some sensors
require a special preparation. Please proceed according to
the operating instructions for the sensor.
2) Switch the meter on using the on/off or meas key.
3) Depending on the measurement method and the sensor
used, immerse the sensing part of the sensor in the
medium to be measured.
4) Watch the display and wait for the reading to stabilize.
Toggling between Compensated and
Uncompensated Measured Values
With temperature compensation (TC) activated, you can press
the meas key during measurement to toggle between display
of compensated and uncompensated values.
Keys for
measurement
Adjusting the Temperature
When you connect a sensor without temperature detector,
you can manually adjust the temperature for measurement or
calibration:
1) Press meas to access measuring mode.
The adjusted temperature will be displayed.
2) Set the desired temperature value using the
or
arrow.
Holding the key depressed changes the temperature value
at high speed.
