Knick
Elektronische Messgeräte
GmbH & Co. KG
Headquarters
Beuckestr. 22 • 14163 Berlin
Germany
Phone: +49 30 80191-0
Fax:
+49 30 80191-200
www.knick.de
Local Contacts
www.knick-international.com
096383
MemoView
ZU1059
TI-ZU1059-KNX02
Copyright 2019 • Subject to change
Version: 2
This document was created on Sept. 23, 2019
The latest documents are available on our website below the
corresponding product description.
www.knick.de
Read before installation.
Keep for future use.
Installation Guide
English
Intended Use
MemoView enables contactless, parallel reading of sensor data (measure-
ments, sensor status, calibration data) from Memosens sensors.
Conditions:
• The Memosens connector of the sensor is fully accessible.
• The Memosens sensors are connected to an operating, compatible
transmitter via a Memosens connecting cable:
MemoRail A1401N
FW version 01.04.00 or higher,
MemoRail A1405N Modbus FW version 01.01.00 or higher,
Protos II 4400 S/C
FW version 01.00.00
• For data display, MemoView is connected to to a compatible meter via
the MemoView cable:
Portavo 907, 908
FW version 1.8.0 or higher
See connection diagram on the back page of this guide.
MemoView is maintenance-free.
Note: Configuration and calibration of the sensor cannot be performed
via MemoView.
Specifications
Material
MemoView housing
Stainless steel, PVC
MemoView cable
Sheath: PUR UL
Screw sleeve M8 plug: brass, nickel-plated
Cable
MemoView cable, 2 x M8 plug
Length: 2.9 m / 9.51 ft
EMC
Emitted interference
Interference immunity
EN 61326-1
Class A (industrial applications)
Industrial applications EN 61326-2-3
RoHS conformity
According to EU directive 2011/65/EU
Ambient temperature
-20 ... 55 °C / -4 ... 131 °F
Storage temperature
-25 ... 70 °C / -13 ... 158 °F
Humidity
Climatic class
10 ... 95 %
3K5 according to EN 60721-3-3
Degree of protection
IP 65
Weight
160 g (MemoView)
240 g (Me MemoView cable)
Dimensions
Diameter: 40 mm / 1.57 in
Height: 80 mm / 3.15 in
The safety alert symbol on the nameplate means:
Read this Installation Guide. Use the product in accordance
with the safety instructions and in compliance with the
specifications.
!
Safety Instructions
• The product is not approved for use in explosive atmospheres.
• Converting and/or modifying the product is not permitted.
• The general safety regulations for the respective measuring point
must be observed.
Package Contents
MemoView
MemoView cable, 2.9 m / 9.51 ft.
Installation Guide
Test Report acc. to EN 10204
Check the product for damage upon receipt.
Do not use damaged products.
Accessories
Order code
MemoView cable
ZU1060
Returns
Please contact our Service Team. Ship the cleaned device to the address
you have been given. If the device has been in contact with process
fluids, it must be decontaminated/disinfected before shipment.
In this case, place a Declaration of Contamination in the consignment to
prevent any risk to the health and safety of our service personnel.
Disposal
Observe the applicable local or national regulations concerning the disposal
of “waste electrical and electronic equipment.”
