background image

Diaphragm liquid pump NF 60, NFB 60 

Safety 

KNF Flodos AG BA_NF60_EN_05_069208 
Translated from the Original Operating and Installation Instructions

 

3.  Safety 

 

Note the safety precautions in Chapters 6. Installation and 
connection, and 7. Operation. 

 

The pumps are built according to the generally recognized rules of 
technology and in accordance with the pertinent occupational 
safety and accident prevention regulations. Nevertheless, dangers 
can result during their use which lead to injuries to the user or 
others, or to damage to the pump or other property. 

Only use the pumps in perfect working order and in accordance 
with their intended use. Always ensure adherence to the operating 
and installation instructions and work in a safety-conscious man-
ner. 

Make sure that only trained and instructed personnel or specially 

trained personnel work on the pumps. This especially applies to 
assembly, connection and servicing work. 

Make sure that all personnel have read and understood the operat-
ing and installation instructions, and in particular the "Safety" 
chapter. 

Always ensure adherence to all pertinent accident prevention and 
safety regulations when working on and operating the pump. 

Always observe the safety regulations when handling dangerous 
media. 

Always ensure adherence to all information stickers on the pumps, 
such as flow direction arrows and type plates, and keep stickers in 
legible condition. 

All replacement parts should be properly stored and disposed of in 
accordance with the applicable environmental protection regula-
tions. Ensure adherence to the pertinent national and international 
regulations. This especially applies to parts contaminated with toxic 
substances. 

Dispose of all packaging in an environmentally appropriate 
manner. The packaging materials are recyclable. 

Ensure that the pump is disposed of in an environmentally 
appropriate manner at the end of its useful life. Use appropri-
ate waste collection systems for the disposal of end-of-life 
equipment. Used pumps contain valuable recyclable materials. 

 

 

 

Personnel 

Working in a safety- 

conscious manner 

Handling dangerous media 

Notes 

Environmental protection 

Disposal 

Содержание NF 60



























Отзывы: