Diaphragm pump N922 EX
Installation and connection
Translation of Original Operation and Installation Instruction, english, KNF 313600 11/19
17
7 Installation and connection
The pumps are only to be installed in accordance with the operating pa-
rameters and conditions described in Chapter
.
à
Observe the safety notices (see Chapter Safety).
DANGER
Risk of dangerous gas mixtures during pump op-
eration
Depending on the medium being transferred,
breakage of the media-contacting components
can result in a dangerous mixture if the medium
mixes with the air in the compressor housing or
the surroundings.
à
Before using a medium, check the compati-
bility of the media-contacting components
(see
) with the medium.
7.1 Installing the pump
à
Before installing, store the pump at the installation location to allow it to
reach the ambient temperature.
Mounting dimensions
à
For mounting dimensions, see the following figures:
