KNF N 143 AN.12 E, Инструкция по эксплуатации и установке

Страница: 6 / 32

Safety Diaphragm Pumps N 143/186.12
6 Translation of original Operating and Installation Instructions, english, KNF 121610-121613 07/16
commissioned until such time as it has been determined that the
machine in which the partly completed machinery is to be
assembled is in conformity with the provisions of the Machinery
Directive 2006/42/EC.
The following essential requirements of
Annex I of Directive 2006/42/EC (general principles) are applied
and observed:

General Principles No. 1

No. 1.1.2. / 1.1.3. / 1.3.1. / 1.3.3. / 1.3.4. / 1.4.1. / 1.5.1. /
1.5.2. / 1.5.8. / 1.5.9. / 1.7.4. / 1.7.4.1. / 1.7.4.3.
As these partly completed machinery are OEM-models the power
supplies and the equipment for disconnecting and switching-off the
partly completed machinery respectively have to be considered
when mounting as well as over-current and overload protective
gear.
In addition a protection against mechanical parts in motion and hot
parts, if existing, has to be provided when mounting.
The pumps conform to the Directive 2011/65/EU (RoHS2).
The following harmonized standards have been used:

DIN EN 50581

DIN EN 55014-1/2

DIN EN 61000-3-2/3

DIN EN 60204-1
Only have repairs to the pumps carried out by the KNF Customer
Service responsible.
Use only genuine parts from KNF for servicing work.
Customer service and
repairs