KNF FP 70, Руководство по установке

Страница: 9 / 18

Installation Instructions FP 70 Installation
KNF Flodos 330352_MA_FP70_EN_00
9
3.2 Mechanical mounting
▪
Protect the product against impacts, knocks, and strong vibra-
tions.
▪
Please refer to the product data sheet for dimensions, installa-
tion positions, and fluid connections.
Following mounting options are available
▪
Guiding rail ( 1 ) for side mounting of clip. See accessory in
chapter 7.
▪
Holes ( 2 ) for standard M3 screws. Hole spacing and depth of
holes see data sheet FP 70.
3.3 Connecting the fluid system
Use suitable means to check the fluid connection for leaks.
Connections for G1/8’’ thread and more information regarding di-
mensions, please refer to the data sheet.
3.4 Electrical connection
For terminal assignment, output data, and control requirements,
please refer to the data sheet.
Observe the regulatory requirements for electrical installations:
▪
Overload protection and separating protective devices
▪
Contact protection and additional insulation
▪
Ground connections
▪
Protection against vibrations, tensile stress, and corrosion
For detailed information about control, please refer to the drive
specification (available from your local KNF dealer).
Figure 2: Mounting