K'Nex Missions In Space 15118, Руководство пользователя

Страница: 6 / 35

Each K’NEX piece has its own color and shape;
match it to pieces in the picture instructions.
Put pieces together exactly as pictures show.
Be sure to put Rods in the correct slots of
Connectors, so you have proper angles in your
finished model. Install batteries before building
models. The instructions get you going, but the
fun doesn’t stop there. Design your own models!
It’s very important to position blue and silver
Connectors in a specific direction. Pay close atten-
tion to the instructions, and position these
Connectors horizontally or vertically exactly as they
are shown. Push together tightly until you hear a
“click”.
K’NEX Building Tips / Safety Information
Keep this important information for future
reference.
• Do not connect model to more than one
PowerPack
TM
.
• Remove rechargeable batteries from model
before charging; they must be charged only
under adult supervision.
• Non-rechargeable batteries must not be
recharged.
• Do not mix different types of batteries; do not
mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries. Do
not mix new and used batteries. Only batteries
of the same or equivalent type recommended
should be used.
• Insert batteries with correct polarity (+/–) as
shown.
• Remove exhausted batteries from model;
do not short-circuit supply terminals.
• Keep PowerPack
TM
free of dust; do not immerse
or use in water.
• Alkaline batteries AA (LR6) are
recommended.
• Do not put small black Rods in any openings
of the PowerPack
TM
; they will damage the
motor, and cannot be removed.
1
2
3
4
1 3
1
Faded colors indicate sections previously built;
connecting points will be in full color.
LOOK OUT! When you see this symbol
on the instructions, pay close attention
to the area being pointed out.
It’s important to build this section correctly, or
the model may not work properly.
Pay close attention to the number of blue and
silver Spacers needed.
CAUTION: Rubber Bands can cause injury
from snap-back, breaking, or loss of control.
While assembling models shown in instructions,
hold Rubber Band tightly, and do not over-
stretch. Use Rubber Bands only as shown in
these instructions. DO NOT USE FRAYED OR
TORN RUBBER BANDS.
CAUTION: Keep hands, face, hair, clothing
and Power Cord away from all moving parts.
!
WARNING: As with all small items, these
batteries should be kept away from children. If
swallowed, seek medical attention immediately.
• The sound module comes with 3 batteries
already installed for you.
• To replace batteries, remove screw. Insert 3
button cell LR44 batteries (A76 or SR44),
matching the (+/-) diagram inside the
compartment.
CAUTION! Do not use close to the ear! Misuse
may cause damage to hearing.
!
!