16
Figure 3-1
Dimensions in mm
3. Description
3.3 Functional description
The W 200 II surface grinding machine is capable of surface grinding mincing plates and knives
with a diameter of up to 200 mm.
ATTENTION
The mincing plate may not protrude over
the rotary table.
The mincing plates are fixed on the rotary table of the W 200 II surface grinding machine by
means of centering pieces and followers.
For the purpose of surface grinding, mincing knives are attached to a mincing plate using the
centering piece for knives included.
Special mounts are available for unusual applications.
The machine is supplied as standard with CBN grinding wheels.
The W 200 II is optionally supplied with an air purification system (referred to in the following as
the suction unit).
ATTENTION
Abrasives may only be used if they are ap-
proved by KNECHT Maschinenbau GmbH.
ca. 1263 mm
ca. 850 mm
ca. 1950 mm
ca. 1263 mm
ca. 850 mm
ca. 1950 mm
CoG
CoG
