1943
1800
1361
16
3. Description
*) This information may change depending on the electrical power supply.
**) Two-digit sound emission value according to EN ISO 4871 (measurement uncertainty KpA. 3 dB(A)).
Emission sound pressure level according to EN ISO 11201.
A K 24 cutter knife from KNECHT Maschinenbau GmbH was ground.
3.3 Functional description
The automatic grinding machine can be used to grind, deburr, and polish linear, sickle-shaped,
and circular knives.
All knives other than hand knives must be clamped onto grinding plates and ground on the
wet-grinding belt with the respective attachments.
The grinding angle is set continuously between 5° and 35° on the copy grinding device.
Knives are deburred and polished on the finned brushes without attachments.
Figure 3-1
Dimensions in mm
CoG
CoG
