Figure 7-25
Change grinding wheels
1
10
1.5 Figure and item numbers in the operating instructions
If the text refers to a machine component shown in a figure, a figure or item number is added in
brackets after the machine component.
Example: (7-25/1) denotes figure number 7-25, item 1.
Use SW6 Allen wrench to loosen and remove the screw
at the center of the grinding wheel (7-25/1) by turning it
counter-clockwise.
Remove the front or rear grinding wheel and also the con-
nection flange (7-26/1) if necessary and mount the new
grinding wheel in the reverse order.
1. Important notes
