47
8.4 Grinding data
Call the “F5 Grinding Data” sub-menu (8-1/5) via the “F8 Settings” main menu (3-9/14). The data
for the grinding process are entered in the “Grinding Data” (8-8) screen. These data vary accord-
ing to the knife. The data are saved in a file and can be loaded again from the file.
ATTENTION
Changing the grinding data can cause mal-
functions and machine damage. Changes
may only be made under the supervision of
KNECHT technicians or by persons who have
been trained by KNECHT Maschinenbau.
1
“F3 Load from File”
2
“F4 Save As”
3
“F7 Back”
4
“F9 Accept”
5
“F12 Back”: For going back to the previous screen
8. Control system
Figure 8-8
Grinding data
4
5
3
2
1
