40
7.6 Changing the profiling wheel (optional)
Loosen star knob (7-19/1), remove protective
hood and keep it in a safe place.
Loosen and remove the screw in the center of the
profiling wheel by turning it counter-clockwise
with SW22 and SW10 flat wrenches.
Remove the profiling wheel and mount the new
one in reverse sequence of steps.
Attach the protective hood.
ATTENTION
Use only original profiling wheels.
Using other than original profiling wheels
can cause damage to knife and machine.
7. Operation
Figure 7-20
Changing the profiling wheel
Figure 7-19
Dismantling the protective hood
1
