Knauer BlueShadow 80P Скачать руководство пользователя

Страница: 8 / 74

General

BlueShadow Pump 80P Instructions V7685

1.4 Legal information

1.4.1 Liability limitation

The manufacturer is not liable for the following issues:

Non-compliance of these instructions

Non-observance of necessary safety precautions

Improper use

Operation of the device by unqualified personnel (see chapter 2.2 on

page 3)

Use of non-approved spare parts

Technical changes by the user such as opening the device and unaut-

horized modifications

Violations of General Terms and Conditions (GTC)

1.4.2 Transport damage

The packaging of our devices provides the best possible protection

against transport damage. However, check the packaging for transport

damage. In case you notice any damage, inform the Technical Support

and the shipping company within three workdays.

1.4.3 Warranty conditions

For information on warranty please refer to our general terms and condi-

tions on the website:

www.knauer.net/terms

1.4.4 Warranty seal

A blue or orange warranty seal is affixed to some devices.

A blue seal is used by KNAUER’s Manufacturing or Customer Support

for devices to be sold.

After repair, service technicians attach an orange seal onto the identi-

cal position.

After repair, the service technician affixes an orange seal in the same pla-

ce. If unauthorised persons tamper with the device or if the seal is dama-

ged, the warranty will lapse.

1.4.5 Declaration of conformity

The declaration of conformity is enclosed as a separate document with

the product and can be obtained online:

www.knauer.net/en/Support/Declarations-of-conformity

Содержание BlueShadow 80P











































































Результаты поиска

Содержание BlueShadow 80P

Отзывы:

Похожие инструкции для BlueShadow 80P

Бренды по названию

Популярные бренды

Knauer BlueShadow 80P, Инструкция по эксплуатации

Результаты поиска

Содержание BlueShadow 80P

Отзывы:

Похожие инструкции для BlueShadow 80P

Бренды по названию

Популярные бренды