Knauer AZURA S, Дополнение

Страница: 1 / 2

Mounting Bracket AZURA® S
The mounting bracket can be mounted onto the side panel of AZURA® devices with a S foot-
print. It is used to mount a manual injection valve.
ƒ
Allen screwdriver, size 2 mm
ƒ
Allen screwdriver, size 3 mm
Ablauf Abbildung
1.
Position the mounting bra-
cket onto the bore holes in
the side panel. In this posi-
tion, the mounting bracket
must sit flatly on the surface.
2. Slide the washers
1
each
over the thread of the two
smaller cylinder bolts. Using
the Allen screwdriver, size 2,
screw the mounting bracket
onto the housing.
Fig. 1: Rear view: Mounting bracket with valve
Mounting a valve
ƒ
Allen screwdriver, size 3 mm
ƒ
Allen screwdriver, size 2.5 mm
Process Figure
1. Remove the lid from the lever.
2. Loosen the screw of the lever
1
with the
screwdriver size 2.5 mm.
3. Pull off the lever from the adapter plate
2
.
4. Loosen the 2 screws of the adapter plate
2
with the screwdriver size 3 mm.
5.
Detach the adapter plate
2
from the
feather key
3
.
6. Detach the feather key
3
from valve head
4
.
Fig. 2:
Exploded view
Tools
Tools
1
1
2
3
4
Supplement AZURA® Mounting Bracket S, V6848, version 2.0 Page 1