Angle
basket to fit
into slides
NOTE:
Basket can be installed with top basket on right hand side or left
hand side. Determine which orientation is best for your installation.
Be sure to install slides as described below with
wheels to the rear of the
basket
as you wish it to be installed.
1
Identify right and left basket member slides as shown. Attach to basket
(A) using round head machine screws (E). Insert a screw into hole
furthest from wheel and into hole in basket brace. Place nut (F) onto
screw and slightly tighten. Insert second screw (E) into opposite end of
slide (near wheel) in hole that aligns with basket brace and attach nut
(F). Push slide tightly against basket and tighten nuts to hold in place.
Repeat on other side.
2
Place slide bracket assembly (B) on cabinet
fl
oor 1/2" to 3/4" from the
front of the cabinet. Close doors to make sure unit will not hold cabinet
door open. Fasten in place using wood screws (D) provided.
Optional: To avoid splitting wood you may mark placement of screws
with pencil, remove unit and drill pilot holes for fastening screws.
3
Slide basket into slide bracket assembly by inserting wheels on basket
into tracks on slide bracket assembly. The basket should move freely
along the track.
Multi-Use Basket
with Handle and Accessory Basket
Installation Instructions
Inspect all parts and read all instructions prior to beginning assembly and installation.
310233-A-1010
©2010 Knape & Vogt. All rights reserved. Knape & Vogt
®
reserves the right to change speci
fi
cations without notice. Made in USA.
2700 Oak Industrial Drive NE
Grand Rapids, MI 49505 USA
800.253.1561 • www.kv.com
Product Assemblies
USB11 GUSB11
USB14 GUSB14
Tools Required
• Phillips Head Screwdriver
• Drill with 1/16" Bit
for Pilot Holes
• Pencil
• 3/8" Open End Wrench
A
B
C
D
E
x (4)
F
Parts Included
A. Wire Basket
B. Slide Bracket Assembly
C. Basket Member Slides (2)
D. Wood Screws (with points) (4)
E. Round Head Machine Screws
(blunt end) (4)
F. Machine Screw Nuts (4)
x (4)
x (4)
2
3
Slide
(right drawer
member shown)
Round Head
Machine Screw
Nut
Basket Brace
1
