©2017 Knape & Vogt. All rights reserved. Knape & Vogt
®
reserves the right to change specifications without notice.
310580/0917
Grand Rapids, MI
800.253.1561
simplyputorganizers.com
Fully extend sliding members out
of the cabinet. Place the slotted
holes on the cage onto the tabs
on the left hand sliding member.
(2A) Rest the cage on top of the
clip retainers on the right hand
sliding member, but, DO NOT
PUSH DOWN. Close unit so that
the wire cage is completely inside
of the cabinet. Now, push down
firmly on the right side of the wire
cage, until it is fully seated into
the clip retainers. (2B)
Install cage locking clip into right
hand side only by placing the
tabs on the top of the clip into the
openings in the slide. Then push
the top of the clip until it snaps
into place. (3)
Clip handle onto front of cage. (4)
4
4
2b
2
3
2a
Clip
Retainer
Tab
Clip Retainer
Push Top until it snaps
3
