Parts Included
A. Upper Basket (1)
B. Lower Basket (1)
C. Upright Brackets (2)
D. Left Hand Slides (2)
E. Rear
Slide Brackets (2)
F. Right Hand Slides (2)
G. #6-32 x 5/16" Screws (16)
H. #8 x 3/4" Wood Screws (4)
I. #6 x 1/2" Wood Screws (7)
DOUBLE-TIER, MULTI-USE BASKETS
Installation Instructions
Inspect all parts and read all instructions prior to beginning assembly and installation.
310516_1115
2700 Oak Industrial Drive NE , Grand Rapids, MI 49505 USA
800.253.1561 • 616.459.3311 • www.kv.com
©2015 Knape & Vogt. All rights reserved. Made in USA. Knape & Vogt
®
reserves the right to change specifications without notice.
Tools Required
• Phillips Head Screwdriver
• Tape Measure
Product Assemblies:
DBLMUB-11-R-FN
DBLMUB-14-R-FN
DBLMUB-17-R-FN
DBLMUB-20-R-FN
A
1.
Fully extend slides. Mount 1 – left hand slide and 1 – right hand slide to the bottom slide
mounting holes in the upright brackets using 8 – #6-32 X 5/16" slide mounting screws.
Repeat this process for upper slides (1).
NOTE: There are 4 upper basket mounting locations. Install upper slides at desired height.
2.
Attach rear slide brackets to upper slides by pushing bracket firmly onto slides (2).
NOTE: No rear slide brackets are needed for lower slides.
3.
Place slide and upright bracket assembly into cabinet so that the front edge of the slides are
flush with the front of the cabinet opening on the opposite side of cabinet door hinges.
Extend the upper drawer slide.
1
Right Slide
Left Slide
2
3
Flush
B
C
D
E
G
H
I
F
Optional for 1/2
shelf installation.
