7
Safety
The freshness cooler is all around glazed
and is delivered fully assembled (ready
to plug in). Apart from the correct align-
ment at the installation site, final assemb
-
ly by the user is not required.
The person responsible on site
(e.g. the store manager in the
case of installation in a super-
market) must ensure that the
operators of the freshness
cooler at the installation site are instruc-
ted in the correct use of the present
operating manual and are familiar with
it.
The freshness cooler meets all the re-
quirements of EU Directive 2011/65EU
(RoHS2) on the avoidance of hazardous
substances in electrical and electronic
equipment and EU Directive 1907/2006
(REACH) on the registration, evaluation
and approval of chemicals. The refrige-
ration system installed in the cooler works
with the refrigerant R290 (propane) and
the insulating foam polystyrene.
• The global warming potential (GWP)
corresponds to the value 3 and the
ozone depletion potential (ODP) to
the value 0.
Technical data and filling
quantities can be found on
the type plate of the cooler
and on the product data
sheet, which you can obtain
from KMW customer service.
Only use the freshness cooler as descri
-
bed in this user manual. Any other use
is considered improper and can lead
to property damage or even personal
injury.
The freshness cooler is not a child‘s toy.
The manufacturer assumes no liability for
any injury, loss or damage resulting from
improper or improper use. Possible exam-
ples of improper or incorrect use are:
• Use of the freshness cooler for pur-
poses other than those for which it is
intended
•
Non-observance of the safety inst
-
ructions and warnings, as well as the
assembly, operation, maintenance
and cleaning instructions contained
in this operating manual
•
Non-observance of any accident
prevention regulations specific to the
use of the cooler and/or generally
applicable
• Use of accessories and spare parts
that are not intended for the fresh-
ness cooler
• Changes to the freshness cooler
•
Repair of the freshness cooler by so
-
meone other than the manufacturer
or a specialist
• Operation or maintenance of the
freshness cooler by persons who are
not familiar with the handling of the
freshness cooler and/or do not un-
derstand the dangers involved.
