manualshive.com logo in svg

KMT STREAMLINE S30, Руководство по эксплуатации и обслуживанию, Страница: 238 / 261

Поделиться
Скачать
KMT STREAMLINE S30 Скачать руководство пользователя страница 238

 

      

LOCTITE CANADA INC.                                                    01/15/02

                          

      

MISSISSAUGA, ONTARIO L5N 7P2

                         

      

 TELEPHONE: (905) 814-6511  FAX: (905) 814-5391

        

      

CANADIAN WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM Page 03 of 04

      

Product Name:              Loctite(R) 222 Threadlocker Low Strength

      

Item No.:                  21464

      

VI.  TOXICOLOGICAL PRODUCTS                                         (continued)

      

Exposure Limits (TWA)           ACGIH           OSHA            OTHER

      

Ingredients                     (TLV)           (PEL)

      

Silica, amorphous, treated      10mg/m3 (Inhal) 20 mppcf        6 mg/m3

                               

      

 3mg/m3 (Resp)

      

CUMENE HYDROPEROXIDE            None            None            1ppm(6mg/m3)

                                                                Skin(WEEL)

      

TITANIUM DIOXIDE                10 mg/m3        15 mg/m3        None

                                             

      

   Total dust

      

Exposure Limits (STEL)          ACGIH           OSHA

      

Ingredients                     (TLV)           (PEL)

      

Ingredients for which no Exposure Limits have been established are not

      

listed above.

      

Irritancy of Product:      May cause dermatitis on prolonged contact in

                          

      

 sensitive individuals.

      

Sensitization to Product:  May cause dermatitis on prolonged contact.

      

Carcinogenicity:           (See Effects of Chronic Exposure to Product)

      

Reproductive Toxicity:     (See Effects of Chronic Exposure to Product)

      

Teratogenicity:            (See Effects of Chronic Exposure to Product)

      

Mutagenicity:              (See Effects of Chronic Exposure to Product)

      

Name of Toxicologically

 

      

Synergistic Products:     Not Available

      

WHMIS Hazard Class:        D.2.A, D.2.B

      

VII.  PREVENTATIVE MEASURES

      

Personal Protection

      

Eyes:                      Safety glasses or goggles.

      

Skin:                      Neoprene, rubber, or butyl rubber gloves.

      

Ventilation:               Not Applicable

      

Engineering Controls:      See "Ventilation" above

      

Spill or Leak Procedures:  Soak up with an inert absorbent. Store in partly

                       

      

    filled, closed container until disposal.

      

Waste Disposal:            Landfill or incinerate in accordance with

                           

      

Canadian and local regulations.

      

(Contact Loctite Canada's

 

      

Customer Service at       905-814-6511 for Shelf Life Information)

      

Handling Procedures

 

      

and Equipment:            Store below 100°F.

      

Special Handling

      

 Information:              Avoid prolonged skin contact. Keep away from eyes.

KMT 20416099

Содержание STREAMLINE S30






































































































































































































































































Отзывы:

Нет отзывов