KMT SL-IV 100D, Руководство по эксплуатации и обслуживанию

Страница: 6 / 185

SECTION 1
INTRODUCTION
Page 1-1
49831878
1 SL-IV Waterjet Pump General Information
The Streamline SL-IV Waterjet Pump, maintains the level of component
reliability and ease of installation and maintenance that have made the
Streamline waterjet pumps the standard of the industry for both water and
Hydrobrasive™ applications.
The SL-IV Waterjet Pump uses low pressure water, which meets certain quality
requirements, and increases the pressure up to 4,136 bar (60,000 psi) for ultra-
high–pressure waterjet cutting, hydrobrasive cutting, cleaning, surface
preparation, etc.
This manual provides information for installation, operation, and maintenance
of the SL-IV Waterjet Pump.
Basic configurations of SL-IV intensifier pumps discussed in this manual are
listed in Table 1-1 below.
TABLE 1-1. Model Data- SL-IV Waterjet Intensifier Pumps
Motor
Horsepower
Rating
Plunger Quantity
and Diameter
(inches)
Hp Kw
Intensifier
Model HP Water
Max Oper
Pressure
(psi)
7/8
(0.875”)
[22 mm]
1-1/8
(1.125”)
[29 mm]
Frame
Dim “L”
(inches)
Redundant
Option
Available?
30 22 SL-IV 30+ 2 - 67.75 Yes
50 37 SL-IV 50+ 2 - 67.75 Yes
60 45 SL-IV 60+ 2 - 77.75 Yes
75 56 SL-IV 75+ - 2 77.75 Yes
100 75 SL-IV
100D 4 - 77.75 No
100 75 SL-IV 100S
60,000
- 2 77.75 Yes
1.1 Physical Description
The waterjet pump is equipped with one or two hydraulically operated
intensifiers, one or two liters of high pressure attenuator volume, a
motor/hydraulic pump assembly, an electric starter panel, control sensors,
solenoids and logic, control interface panel, a low pressure water booster pump,
and a low pressure water filter.
The high pressure system is conveniently mounted on a drip pan. All service
components are easily accessible from at least two sides simplifying
maintenance. The entire high pressure system can be removed from the rest of
the unit quickly for maintenance and serviceability.