PROGRAMMING
The TC310 is programmed using only 3 buttons. Each button has the following function.
PROG
(Yellow) used to enter program mode and to step through program items.
UP
(Black) replaces the date with the day of week during normal operation. Increments the flashing item in
program mode.
DOWN
(Grey) overrides the relay output On to Off or vice versa during normal operation. Decrements the
flashing item in program mode.
If during program mode no button is pressed for 1 minute the clock automatically reverts to the time display.
STEP BY STEP PROGRAM GUIDE
Setting the Time
Press the PROG (Yellow) button once to enter programming mode. The display
will show TIME ? followed by the present time setting (HH:MM) the hour digits will be flashing.
Use the UP (Black) / DOWN (Grey) buttons to select the correct hour in 24 hour format (0-23). When the
correct hour has been selected press the PROG button to advance to the minutes. The hour digits will stop
flashing and the minute digits will start flashing. Use the UP / DOWN buttons to select the correct minutes (0-
59). When the correct time is displayed press the PROG button.
Setting the Date
The display will show DATE ? followed by the present date setting (DD/MM/YY).
The day digits will be flashing. Use the UP / DOWN buttons to select the correct day of month (1-31). When
the correct day is shown press the PROG button to advance to the month. The month digits will start flashing
and the day digits will stop flashing. Use the UP / DOWN buttons to select the correct month (1-12). When
the month is correct press the PROG button to advance to the year. The year digits will start flashing and the
month digits will stop flashing. Use the UP / DOWN buttons to select the correct year (0-99).
When the correct date is displayed press the PROG button.
NOTE it is important that the date is set correctly for correct daylight saving operation.
Setting Time Zones
The display will show ZONE 1 followed by the present ON / OFF setting.
Use the UP button to turn the time zone ON or the DOWN button to turn the
time zone OFF. Press the PROG button. If the time zone is turned OFF the
display will move to the next time zone. If the time zone was switched ON the
display will show START followed by the present start time setting. Use the UP
/ DOWN and PROG buttons to select the correct time as described in the
section setting the time. When the correct time is displayed press the PROG
button. The display will show STOP followed by the present stop time setting.
Use the UP / DOWN and PROG buttons to select the correct time as described
in section setting the time. When the correct time is displayed press the
PROG button.
The display will show the present setting for day of operation use the UP /
DOWN buttons to select when the time zone is to operate this can be set for
individual days, weekends only, weekdays only or everyday. When the correct
option is displayed press the PROG button. Repeat above for all time zones.
NOTE when programmed if the time falls within a programmed time zone on period the relay will not
switch ON. Use the override (GREY) button to turn the relay ON. After this the relay will operate normally
with the programmed time zones.
