KMC Controls SimplyVAV BAC-8000 Series, Быстрое руководство по установке, Страница: 2 / 2


Override timer

Standby timer

Discharge Air Temp
MAXF
Max. Fan Speed (%)

Calibration

Auto. Occ. Mode

Set Password 1

Set Password 2

Min, Cool Flow

Max. Cool Flow

Auxillary airflow

Max. Heat Flow

Min. Heat Flow

Advanced

Se
tpoints and limits

Min. Fan Speed (%)

Dual Minimum CFM

Primary K Factor

Secondary K Factor

No/Stg/Par

No/Ser/Par

CCW/CW


Unoccupied Heating

Cool Setpoint

Heat Setpoint

Occupied Cooling

Occupied Heating

Changeover

Unoccupied Cooling

Standby Differential

Temp. setpoints

C onfiguration

Optional

Differential

Restore

 
BACnet instance



BACnet MAC

Baud Rate

Primary

Measured Max. Flow

Measured Min. Flow

Secondary
 
E nd configuration

Measured Max. Flow

Measured Min. Flow

E
nd configuration

E
nd configuration

English/Metric
Use an STE-8001 or STE-8201 sensor to
configure the SimplyVAV controller. If another
type of sensor is installed as the room sensor,
temporarily connect an STE-8001 as a service
tool.
To get started:
1. Press the up and down buttons
simultaneously to start configuration or
balancing.
2. Enter Password 2 if required. New
Quick start configuration guide for SimplyVAV controllers
CNFG The main configuration
parameters for the VAV terminal
unit.
COMM Set BACnet device
instance, MAC address, and
network baud.
BLNC Set airflow balancing
parameters. Only the PRI (primary)
menu is used for single duct VAV.
STPT Enter temperature setpoints
and limits.
BOX Set up reheat, fan operation,
and basic terminal unit functions.
FLOW
Set airflow setpoints and
limits.
ADVC Enter passwords and
enable model specific features.
RSTR Restore to factory settings.
For complete details on controller configuration, browse to
the KMC Controls web site and download a PDF file of the
SimplyVAV Application and Installation Guide.
installations do not have a password.
3. Press the up and down buttons to
move between functions or change values.
4. Press the setpoint button to choose a
selection or save a value.
* Not used for all models
** Select English (factory setting) or Metric before setting other parameters.
© 2020 KMC Controls, Inc. 915-019-04B
kmccontrols.com