REE-2002
2
Installation Guide
© 2013 KMC Controls, Inc.
884-019-02F
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
Important Notices
The material in this document is for information
purposes only.
The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no event
shall KMC Controls, Inc. be liable for any damages,
direct or incidental, arising out of or related to the
use of this document.
Maintenance
No routine maintenance is required, however protec-
tion from extremes of humidity and dirt is recom-
mended. Careful installation will also ensure long
term reliability and performance.
Troubleshooting
• Check the wiring.
• Check the voltages.
More Information
NOTE: The REE-2002 may also be used to convert
0–5 VDC signals from building automation
systems to 0–10 VDC or 4–20 mA signals.
See the graph for output options over a 0–5
VDC input range.
For more information about
using the THE-1102 with the
.
Specifications
Supply Voltage
24 VAC (+20%/–15%), Class 2
only
Input Power
0.75 VA at 24 VAC
Output Capacity
0–10 VDC output into 1000
ohms or greater
4
–20 mA output into 250 ohms
min. and 650 ohms
max.
Connections
Plated screw terminals
Wire Size
14–22 AWG, stranded
Material
Flame-retardant plastic
Weight
2 oz. (57 grams)
Temperature Limits
Operating
40 to 120° F (4 to 49° C)
Shipping
–40 to 140° F (–40 to 60° C)