MEP-3001/3006
2
Installation and Operation Guide
© 2014 KMC Controls, Inc.
006-019-01A
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com; [email protected]
Maintenance
These actuators are noise-free and maintenance-free.
Careful installation will help ensure long-term reli-
ability and performance.
Operation
After the mechanical and electrical installations have
been completed, cycle the actuator to verify opera
-
tion. (See Illustrations 4 and 5.)
When power is applied to the actuator, the tem
-
perature of the heating element rises, causing the
solid expansion medium to expand and stroke the
attached valve body. The valve starts to open after
preheating for approximately 1 minute if the heating
element is switched on in a cold (room temperature)
state, and achieves the maximum stroke after (ap
-
proximately) another 3-1/2 minutes. At power-off,
the expansion element cools down, and the spring
closes the valve.
De-energized position (gap closed):
•
For MEP-3001s, the actuator shaft
is extended and the valve is closed.
•
For MEP-3006s, the actuator shaft
is retracted and the valve is open.
(Fully) energized position (gap open):
•
The MEP-3001 has been connected
to the power supply for at least
4-1/2 minutes. The actuator shaft is
retracted and the valve is open.
•
The MEP-3006 has been connected
to the power supply for at least
4-1/2 minutes. The actuator shaft is
extended and the valve is closed.
Select Specifications
Power
24 VAC (± 20%), 50/60 Hz,
Class 2 only, 6 VA max.
Control
Two-position or time-propor-
tional
Primary Fuse
Must supply externally
Nominal Force
22.5 in-lb. (100 N•m)
Stroke Maximum
0.18 inches (4.5 mm)
Positioning Time
270 sec. @ 68° F (20° C)
Weight
0.4 lb. (0.18 kg)
Mounting Location
NEMA 3 (IP54), interior only
Approvals
Conforms to CE requirements
De-energized Position
MEP-3001 (NC)
Actuator shaft extended, valve
closed (for VEP-12/22/34 se-
ries)
MEP-3006 (NO)
Actuator shaft retracted, valve
open (for VEP-11/21/37 series)
Temperature Limits
Medium
34 to 230° F (1 to 110° C)
Ambient
41 to 122° F (5 to 50° C) @ 0 to
85% RH (non-condensing)
Shipping
–4 to 140° F (–20 to 60° C) @ 0
to 95% RH (non-condensing)
UP
Illustration 4—Position Indication
Illustration 5—Opening and Closing Times
More Information
For more information
on applications, see the
REE-5017
on the
KMC
web site
.
See also, the
REE-5106
.
