Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
4
Safety Information
Do not completely tighten bolts and screws until indicated in assembly step.
Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use
bleach or solvents.
Ga (8 + 1 spare)
Short Bolt
Gb (32 + 2 spares)
Screw
Gd (8)
Metal Washer
Ge (1)
Long Allen Wrench
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Gc (16 + 1 spare)
Long Bolt
Gf (1)
Allen Wrench
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Stool: 225 lbs
Table: 100 lbs
Do not store anything on glass tabletop. Use furniture covers or store
indoors during cold or inclement weather.
CAUTION:
If you overload your
furniture, injuries can occur.