KMART 42909224 Скачать руководство пользователя

Страница: 4 / 4

STEP 9

STEP 10

Attach board 8 onto board 7 & 9 with part D.

Attach the drawer onto Step 6 and then adjust drawer runner into corresponding position

as per diagram.

ATTENTION:

DO NOT TIGHTEN THE SCREWS FULLY DURING ASSEMBLY.

FULLY TIGHTEN SCREWS AFTER THE FINAL ASSEMBLY STEPS.

DO NOT PUT HOT ITEMS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF PRODUCT!

Finish the assembly.

Predrill the hole at wall, insert part K into hole,

attach Anti Tip Strap J with part D & M into the

corresponding position as per diagram.

It is strongly recommended that this product is permanently fixed to the wall. Please seek

professional advice if you are in doubt of what fixing device to use.

Regularly check that anchors are securely maintained.

Check any electrical wires or plumbing inside the wall before drilling any holes

(if you are unsure please seek professional advice from a qualified tradesperson).

CAUTION:

for your safety when attaching the anchor fixings, please note the following:

STEP 11

Содержание 42909224

Страница 2: ...oard 1 into the corresponding position as per diagram Put board 5 onto board 2 3 into the corresponding position as per diagram Attach board 2 3 12 onto board 1 with part B C Attach board 4 onto board 2 3 12 with part C D 2 3 2 3 12 Put part N onto screw holes of board 2 into the corresponding position as per diagram ...

Страница 3: ... bottom of each leg Fix part A onto board 11 into the corresponding position as per diagram Attach board 7 9 onto board 11 with part B Attach Anti Tip Strap J onto board 4 with part L M into the corresponding position as per diagram 4 M J L 11 11 B 7 9 B B B 10 Put board 10 onto board 7 9 into the corresponding position as per diagram 7 9 A A A A ...