Thank you very much for choosing a Klutch product. For future reference, please complete the
owner’s record below:
Serial Number/Lot Date Code: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This pan and brake box is designed for certain applications only. Northern Tool and Equipment
cannot be responsible for issues arising from modification or use of this product in an
application for which it was not designed. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed.
For technical questions please call 1-800-222-5381.
Table of Contents
Intended Use ----------------------------------------------------------------------------------------------- 1
Technical Specifications ---------------------------------------------------------------------------------- 1
Important Safety Information ----------------------------------------------------------------------------- 2
Specific Operation Warnings ----------------------------------------------------------------------------- 3
Assembly --------------------------------------------------------------------------------------------------- 3
Before Each Use ------------------------------------------------------------------------------------------- 4
Operating Instructions ------------------------------------------------------------------------------------ 4
After Each Use --------------------------------------------------------------------------------------------- 5
Maintenance ----------------------------------------------------------------------------------------------- 6
Parts List --------------------------------------------------------------------------------------------------- 6
Parts Diagram ----------------------------------------------------------------------------------------------7
Replacement Parts ---------------------------------------------------------------------------------------- 8
Limited Warranty ------------------------------------------------------------------------------------------- 8
Intended Use
The Pan and Brake Box is used as a hand-brake as well as to form a box or pan with four sides
and a bottom from one sheet of metal. The machine is mostly used in the manufacture of
electric switch boxes and panel board cabinets. Other applications are forming cases, buckets,
carry boxes and all kinds of boxes and pans.
Technical Specifications
CAPACITY
The capacity of the brake is determined by the bending edge thickness provided by the Angle
Bar (25) when mounted on the bending leaf (22).
The Angle Bar (25) allows the full-rated 1" flange or wider on mild steel. Narrower flanges can
be bent on lighter metal.
On capacity work, the reinforcing Angle Bar must be in the normal or top position.
The capacity of brake is reduced by four gauges if the brake is used without the Angle Bar.
48 INCH PAN AND BRAKE BOX
OWNER’S MANUAL
48 INCH PAN AND BRAKE BOX
OWNER’S MANUAL
Item# 49676
1 of 8
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and
other basic safety precautions may result in serious personal injury.
Property
Max. Lift Height (in.)
Bending Applications
Dimensions (in.)
Specification
7/8
Mild steel, stainless steel, aluminum, copper place
64.2 (L) x 23.6 (W) x 16.2 (H)
