Page 7 of 15
•
Keep the vise clean for best and safest performance.
•
DO NOT exceed this rated capacity. Never apply excessive force to a work piece.
•
Only use this vise on a surface that is stable, level, dry, and capable of sustaining the load. Keep
the surface clean, tidy and free from unrelated materials and ensure that there is adequate
lighting.
•
Inspect the vise before each use. DO NOT use if bent, broken, cracked or otherwise damaged.
•
Check to ensure that all applicable bolts and nuts are firmly tightened.
•
Ensure that work piece is center-loaded and secure.
•
DO NOT use the vise to compress springs or any other item that could disengage and cause a
potential hazard. Never stand directly in front of a loaded Vise.
•
DO NOT operate the vise when you are tired or under the influence of alcohol, drugs or
medication.
•
DO NOT expose the vise to rain or wet or damp conditions.
•
If the Vise needs repairing and/or there are any parts that need to be replaced, have it repaired by
authorized technicians and only use the replacement parts supplied by the manufacturer.
•
Use caution when hammering anything in or on this vise as the workpiece can be dislodged from
the vise causing injury or property damage. Hammering can also cause metal chips to become
airborne, causing injury.
•
Wear ANSI Z 87.1 compliant goggles.
•
Keep all bystanders away from the work area.
