This angle grinder stand is designed to hold most common 4 1/2in. or 5in.
grinders with side handles without modifications. It turns your portable angle
grinder into a metal-cutting chopsaw which makes it a perfect tool for cutting
tubing, barstock and rebar.
Intended Use:
Specification:
Base size:
9 1/2in. x 7 1/2in. (24x19cm)
Clamp capacity:
4 1/2in. or 5in. angle grinder
Thank you very much for choosing a KLUTCH
TM
product!
For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read
the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot
be responsible for issues arising from modification. We strongly recommend
this machine is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application,
DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean,
free of clutter and well lit. Cluttered and dark work
areas can cause accidents.
• Do not use your tool where there is a risk of causing a fire or an explosion;
e.g. in the presence of flammable liquids, gasses, or dust. Power tools create
sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control, so visitors should remain at a
safe distance from the work area.
• Be aware of all power lines,
electrical circuits, water pipes and other
mechanical hazards in your work area, particularly those hazards below the
work surface hidden from the operator's view that may be unintentionally
contacted and may cause personal harm or property damage.
• Be alert of your surroundings.
Using power tools in confined work areas
may put you dangerously close to cutting tools and rotating parts.
1
General Safety Rules:
WARNING!
Read and understand all instructions.
Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
WARNING!
The warnings, cautions, and instructions discussed in
this instruction manual cannot cover all possible conditions or
situations that could occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Unpacking:
When unpacking, make sure that the item is intact and undamaged.
The following should be supplied (See Figure 1). If any parts are missing
or broken, please call Customer Support at 1-800-222-5381.
1 x Base
1 x Stand
1 x Safety Guard
1 x M10x68mm Bolt with nut
1 x M10x50mm Bolt with nut
2 x M10x30mm Bolt with nut
2 x M8x25mm Bolt with nut
2 x M6x25mm Bolt with nut
4 x Plastic Spacer
1 x Handle
2 x Jaw Clamp
1x lever
1
2
