Klutch 343901, Руководство пользователя

Страница: 6 / 10

Changing accessories
1. First remove any accessory that might already be in the tool. Undo the locking screw by turning it
counterclockwise using the supplied Allen key.
2. Fit the accessory onto the tool attachment making sure that the holes pass over the lugs.
3. Tighten the locking screw using the Allen key.
Changing sanding sheets
The sanding sheets are attached with hook-and-loop fasteners. Remove the old sanding sheet, brush off the
hook-and-loop fabric on the sanding pad if necessary, and then attach the new sanding sheet.
Operation
Starting the machine
1. Before connecting the machine to the power point, make sure that the ON/OFF switch is set to OFF.
2. Start the machine by sliding the ON/OFF switch to the ON position.
Speed selection
• The speed can be regulated using the speed selector.
• The choice of speed depends on the type of work being carried out and the type of material being worked.
Experiment until you find the best setting.
Cutting off and sawing
• If you are using the bending shoval blade, make sure the there are no nails or screws in the workpiece.
Remove any nails and screws or use the half circular saw blade.
• If you are cutting wall tiles, bear in mind that the tool will be subjected to hard wear during prolonged use.
5