5 OF 8
1. Make sure that the air valve (or trigger) is in the “off” position before connecting to the air
supply.
2. An air pressure of 90 PSI is required.
3. Drain the air tank daily. Water in the airline can damage the tool.
4. Clean the air inlet filter weekly.
5. Line pressure should be increased to compensate for longer air hoses (over 26 feet or 8
meters). The hose diameter should be 3/8in. I.D.
6. Keep the hose away from heat, oil and sharp edges. Check the hose for wear and make
certain that all connections are secure.
MAINTENANCE
WARNING: Make sure the Mini Thru-Hole Air Ratchet is disconnected from its power source
before attempting any maintenance, cleaning, or inspection.
·
Maintain your Mini Thru-Hole Air Ratchet. It is recommended that the general condition of any tool be
examined before it is used. Keep your Mini Thru-Hole Air Ratchet in good repair by adopting a program
of conscientious repair and maintenance in accordance with the recommended procedures found in
this manual. If any abnormal vibrations or noise occurs, turn the Mini Thru-Hole Air Ratchet off
immediately and have the problem corrected before further use. Have necessary repairs made by
qualified service personnel.
·
Keep all cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control. Keep handles dry, clean, and free from oil and grease.
·
Cleaning. Use only soap and a damp cloth to clean your Mini Thru-Hole Air Ratchet. Many household
cleaners are harmful to plastics and other insulation. Never let liquid get inside the Mini Thru-Hole Air
Ratchet.
Содержание 100808
Страница 6: ...6 OF 8 DIAGRAM PARTS LIST...