7
MOD-KOZE-50 - mounting instructions
d) Final mounting
www.KlusDesign.eu
To facilitate further work, mark
the location of the items
(1.2)
in
the RAM-KOZE-50 profile, e.g. with
colored adhesive tape.
Prepare as many wedges
(9)
as there are items
(1.2)
. They will
prevent the OMODO-50
profile from falling out in the
initial phase of the mounting
procedure.
To prevent the OMODO-50 profile
from falling out, insert wedges
temporarily
(9)
. They should be
inserted into the marked spots in
the gap between item
(1.1)
and
item
(2.1)
. There should be one
wedge for each marked element
(1.2)
and they should
be placed from the side of the
profiled orientation line.
Connect the main power cables to
the power supply
(6)
.
Insert the OMODO-50 profile into
the prepared mounting track.
To do so, press the profile to the
wall of the RAM-KOZE-50 from the
side of the profiled orientation
line. After that, press it to the item
(1.2)
and move it towards the axis
of the RAM-KOZE-50. This will
make the hooks of the
OMODO-50 profile interlock with
the hooks of the items
(1.2)
.
Id
IId
IIId
9.
9.
9.
9.
9.
6.
1.2
1.2
1.1
1.1
2.1
9.
