Klugmann KO608PBBM, Инструкция по эксплуатации

Страница: 6 / 11

6
V. INSTALLATION
ATTENTION!
The installation of the oven, its connection to the power supply system, and the very
first start of the oven in exploitation should be performed by authorized service
(qualified technician).
The installation is performed according to the requirements of the present instruction.
ATTENTION
Connection to the power supply system

The method of connection of the power cord is type Y , where the installation can be
made only by a trained service representative.

The electric power cable mustn’t be anywhere near the heating elements (parts).

Check the proper grounding and bonding of the contact by all means.

Use power H05 VV-F 3G 2,5 CE
or
equivalent to the appointed one by all means.

Before connecting the device to the source of energy, check if the voltage appointed on
the sticker corresponds to that of the electricity system. The sticker is at the rear of the
oven.

Follow the indicated on fig. 3 numbers for the outputs for power supply for the rear part
of the oven.

The electrical connection should be performed having in mind the power supply of the
installation and the phrases.

After the installation, all connections and insulation must be protected against random
contact.

The cable should be firmly attached to the antigron bracket.
Fig. 4
Installation of the built-in oven