KlipXtreme RefleXion KWS-614, Руководство пользователя

Страница: 3 / 19

Power/Mode switch:
Press this button for a few seconds to switch the unit on and
off, and to save battery when not in use. The unit will automatically shut off after a
period of inactivity.
Use this button to toggle among the micro-SD
TM
, auxiliary and
Bluetooth
®
operation
modes. An audible tone will be heard while cycling through the different modes.
Previous track/Volume-:
Press and hold to decrease the volume level. Touch this
button to play the previous track. In auxiliary mode, only the volume command
will work.
Next track/:
Press and hold to increase the volume level (when the
maximum level is reached, the speaker will generate a short beep). Touch this
button to play the next track. In auxiliary mode, only the volume command will
work.
Play/Pause and handset button:
In hands free mode, touch this button to answer
and end a call. Press this button for about 3 seconds if you wish to reject an
incoming call. Press twice to dial the last number called (on supported devices).
In playback mode, touch this button to pause your music, or to resume listening
when a call has ended. In auxiliary mode, it will mute the audio when the pause
button is pressed.
1.
2.
3.
4.
Built-in microphone:
Use it for hands-free calling and conferencing.
Micro USB charging port:
Use it to recharge the battery.
Micro-SD
TM
card slot:
Use it to playback music files stored in the memory.
Aux input jack:
Allows the connection of any device equipped with an auxiliary
3.5mm audio connector (for wired playback).
NFC sensor:
Place your NFC-enabled device right on top of the sensor to
conveniently pair the speaker via
Bluetooth
®
.
6.
7.
8.
9.
10.
Mode
Charging
The LED glows solid red. It will turn off once the
battery is fully charged.
The LED blinks fast during pairing
The LED blinks slowly to indicate that the wireless
connection with your mobile device is active
Bluetooth
®
Description
5. Status LED:
Mode
Hands-free The LED blinks slowly during a call
Playback
The LED blinks slowly while streaming music
via
Bluetooth
®
, SD
TM
card or in auxiliary mode
Description
IV. Basic operation
Use the supplied USB cable to charge your portable speaker directly from your
computer or device with a standard USB port.
Make sure that your portable speaker is fully charged before using it for the first
time.
The portable speaker battery has to be initially charged for at least 3 hours.
Thereafter, the battery will take from 2 to 3 hours to recharge.
•
•
•