KlipXtreme Aristos KSB-150, Руководство пользователя

Страница: 7 / 19

Note:
Before installing this product, please make sure your device is compatible
with
Bluetooth
®
.
1. First turn on the soundbar pressing the
Power
button on the top panel or
on the remote control, if you haven’t done so already, and select the BT mode
by pressing the
Mode
selection button or the
BT
button in the remote control.
The
BT
indication will appear on the display.
2. Place both devices not more than one meter away from each other.
3. Enable the
Bluetooth
®
function on your audio device and set it to discover the
wireless soundbar.
4. The BT icon will start blinking to indicate that the system has entered into the
pairing mode.
5. Once the soundbar appears listed under the newly found
Bluetooth
®
devices
(
KSB-150
), the pairing process will start.
6. If pairing is successful, another short sound will be heard, and the
BT
icon will
stop blinking.
7.If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
Pairing the soundbar with your Bluetooth
®
device
VI. Advanced operation
Troubleshooting
Problem Solution
The unit is not turning on.
The remote control
doesn´t work.
Unplug the soundbar, plug it to a power supply and turn
it on again.
Check and make sure the power cord is connected
correctly to the power source.
There is no sound coming
from the soundbar, or the
sound is distorted.
- Make sure the audio cable is connected correctly.
- Turn up the volume slowly.
- Press the Mute button in case it was pressed
accidentally muting the soundbar.
- Press the Play/Pause button.
- Set your TV in the audio output mode that goes
accordingly with the mode setting on the soundbar.
- Install two AAA 1.5A batteries in the remote.
- Replace the current batteries with new ones.
- Point the remote control toward the front of the sound
bar, and make sure it is within the operating range.
I can´t disconnet the
soundbar from the
Bluetooth ®
mode by pressing
the BT button.
The buttons on the
soundbar don´t work.
Press and hold the BT button on the remote control for
about 2 or 3 seconds, or the Mode selection button on
the soundbar for about 5 or 6 seconds to disconnect the
BT device. The BT mode indicator will start flashing when
it is waiting for reconnection.