5
This product is exclusively intended for the field of application described
above. It should only be used as described within these instructions.
Unauthorized repairs, modifications or changes to the product are
prohibited.
2.1
Keep the instrument and the battery out of reach of children.
2.2
Batteries contain harmful acids and may be hazardous is swallowed.
Batteries must not be thrown into the fire, short-circuited, taken apart or
recharged. Risk of explosion!
2.3
Low batteries should be charged as soon as possible to prevent damage
caused by leaking. Wear chemical-resistant gloves when handling leaking
batteries.
Product safety:
2.4
Do not place the unit near extreme temperatures, vibrations or shocks.
2.5
Do not immerse the display unit in water. Water can penetrate and cause
malfunction.
3.0 OPERATION
3.3 The battery is factory installed, when switched off, the display shows the
battery capacity. The device has two buttons. To switch on, press one of
the two buttons
3.4 The display briefly shows the firmware version and then the current
measured temperature. The temperature sensor is located in the probe
tip. In order to measure the correct temperature, the sensor should be at
least 50mm in the sample to be measured.
3.5 To switch off device, press power key for 2 seconds. Device confirms on
and off with a beep and will flicker for 3 seconds. Device switches to
standby after 10 minutes.
3.6 During normal operation, the measuring device shows the remaining
operating time in minutes and seconds in the right-hand corner of the
Содержание ATFV215
Страница 2: ...2 This page is intentionally left blank ...
