KLING & FREITAG VIDA M, Руководство пользователя

Страница: 23 / 30

© KLING & FREITAG GMBH Version 1.3 Page 23 of
30
User's Manual K&F VIDA M Accessories for Mobile Use
6 Mounting the VIDA M Connector Panel
WARNING
Danger of electric shock!
•
The installation of the connector panel must be performed by a qualified electrician.
•
After installing the connector panel, be sure to check the device as specified in VDE 0100
(IEC 60364-1) or similar standards in your region.
•
Note that the requirements of the IP65 specifications are met only when using Neutrik TOP
connectors.
•
Never perform any maintenance work on the equipment other than what is described in
these user's manual.
•
Repair work must be carried out by qualified service personnel authorized by
KLING & FREITAG.
Required Tools Required mounting material
Allen key (size 2.5) Loctite 2400 (supplied with the speaker)
Spanner (size 19)
1. Remove the sealing plate of the
connector panel using an Allen
key (size 2.5).
2. Using the same Allen key, re-
move the ground wire (green/
yellow) from the sealing plate.
3. Remove the connectors and the
bushing shown.
To loosen the bushing, use a
spanner (size 19).