KLING & FREITAG VIDA M Adapter Plate, Руководство пользователя

Страница: 15 / 16

© KLING & FREITAG GMBH Version 1.0 Page 15 of 15
User's Manual K&F VIDA M Adapter Plate
6 Maintenance
Clean this speaker accessory regularly using a corrosion-prevention penetrating oil (for exam-
ple, WD-40).
7 Transportation and Storage
Store the product in a dry place. Also, transport under dry conditions only.
During prolonged storage, ensure sufficient ventilation.
In addition, protect all system parts and K&F VIDA M accessories from mechanical strains in
order to prevent damage.
8 Disposal
Dispose of this product according to local ordinance regulations.
WARNUNG
For the owner and user, it is mandatory to be aware that speaker accessories used to fly or
mount the speakers are fundamentally safety-relevant.
Over time, the accessories may exhibit signs of wear, for example, from mechanical strain,
transport damage, corrosion, or improper handling.
As a basic principle, you must visually inspect the speaker accessory before and after you use
it. For fixed installations, you must inspect it for signs of wear at regular intervals.
When performing those checks, particularly look for deformations, cracks, dents, damage to
threads, and corrosion. Also check slings and lifts (e.g. shackles, chains, and steel ropes) care-
fully for wear and deformation.
If as a result of these checks any uncertainty should arise with regard to safety or if specific
faults are found, stop using the accessories and send in the product to KLING & FREITAG
GmbH for inspection and repairs, if necessary.
Inspection regulations may vary depending on application and country of use. Ob-
serve all applicable regulations; If in doubt, contact local authorities.
Many countries require regular inspection of mounting components and accessories. An addi-
tional annual inspection is typically required to be performed by a technical expert. Moreover,
a legally certified or official authority must perform a detailed inspection every four years.
Therefore, be sure to maintain an inspection log. Enter the values determined for each speaker
and accessory during the periodic checks into this log. This way, relevant data are always at
hand in case of inspection. This inspection log book shall be updated with the inspection steps,
test intervals and parts lists.