Klimor EVO-T COMPACT, Руководство по эксплуатации и обслуживанию, Страница: 17 / 38

15
1. INTRODUCTION
This documentation does not include electrical diagrams,
dcontroller information and Modbus and Bacnet variables.
This information can be found in the documents:
KLIMOR_DTR_EVO-T_E.SCH_060.x.x
KLIMOR_DTR_EVO-T_CTRL_061.x.x
The Control Cabinet EL-…-…-…-…-… meets the require-
ments of: PN-EN 61439-1:2011, PN-EN 61439-3:2012, PN-EN
61000-6-1:2008, PN-EN 61000-6-3:2008.
You can download certificates from the web page:
www.el-piast.com/download/
Switch level application:
• Air supply and air supply-exhaust units
• Systems with water heater (pre- and secondary) and electri-
cal heater (pre- and secondary)
• Systems with water cooler and direct expansion cooler
• Systems with heat recovery based on cross-flow heat ex-
changer or mixing chamber
“2S” Control Cabinets – power supply: 1x230V 50Hz – de-
signed for EVO-T 4100, 1200, 9200 air supply-exhaust AHUs
equipped with fan sections featuring a single fan, both AC
and EC and EVO-T COMPACT 8000, 4100, 1200 with EC fan
; and for EVO-T 1200 and 9200 air supply AHUs equipped
with fan sections featuring double fans, (EC in EVO-T 1200
and AC and EC in EVO-T 9200).
“4S” Control Cabinets – power supply: 3x400V 50Hz
– designed for EVO-T 1200, 9200 and EVO-T COMPACT1200
air supply-exhaust AHUs equipped with fan sections fea-
turing double EC fans and for EVO-T 9200 air supply-ex-
haust AHUs equipped with fan sections featuring double
AC fans.
Electric heaters equipped with dedicated power supply unit
controlled, start/stop signal control, 0÷10VDC and return
alarm signal (can be control the electrical heater through
Aout1 as a PWM amplitude 10VDC, the choice we make in
the service Menu/configuration/electric heater).
DX cooling coils equipped with dedicated power supply
unit controlled, start/stop signal control, 0÷10VDC or max.
two start/stop signals.
The control cabinet may be operated by un-
qualified personnel
Fig. 1 Operation range of control system