3
04.06.2019
stationary radial fan
WPA
-
14
-
S
-
N
The device has been constructed
and produced
on the basis of following harmonized standards:
EN ISO-12100:2012
–
“Safety of machinery –
Basic concepts, general
princi-
ples
for design. Risk assessment and risk reduction”.
EN 60204-1:2018-12
–
“Safety of machinery – Electrical equipment of machi-
nes.
Part 1: General requirements”.
EN 60034-1:2011
–
“Rotating
electrical
machines
–
Part 1: Rating data
and parameters”.
EN ISO 5802:2008/A1:2015-07
–
“Industrial Fans –
Performance
testing in situ of instal-
ling”
EN ISO 13857:2010
–
“Safety of machinery –
Safe distances to prevent ha-
zard zones being
reached by upper and lower limbs”.
2.
Application
WPA-14-S-N
stationary fan has been constructed
for air-supply ventilation or extraction ventila-
tion of rooms
and workplaces.
Especially, the
solution is efficient for application with a system
of local exhausts.
Designed for stationary
installing in ventilation rooms
or
other
technical rooms
.
Mainly, t
he fan is designed for conveying the air, of dustiness not exceeding 0,3 g/m³, without
viscous impurities, aggressive contamination or compounds creating hazard of explosion.
3.
Reservations of Producer
A.
Manufacturer accepts no liability
for any consequences following from the operational use
that is in contradiction to the purpose of application.
B.
It is unacceptable to install on the
device structure
any additional elements
not
belonging to
its normal construction or accessory set.
C.
Any structural changes
or modification
of the device,
carried out
by
User
on one’s own are
not permitted.
D.
Protect the housing from mechanical damage.
E.
The fan cannot be
used for conveying
the
air contaminated
with a
mixture of flamma-
ble substances in a form of
gas
, vapour, mist and dust that in connection with
the
air
create the explosive atmosphere
.
F.
Do not use the fan
for
conveying
the
air containing viscous impurities that could accumula-
te on the device surface, especially on the impeller.
G.
Neither use it for forwarding the
air
with
aggressive pollutants
which will destructively effect
the device structure.
H.
During operation,
the
maximum impeller rotations should
not
exceed
the
nominal rotations.
I.
Manufacturer is not responsible for wounds, injuries, body laceration
experienced by User
or personnel during the improper operational use.